172 DOMINION SX USER G UIDERSC). The icon on status line will display Write Access (Lock) now, meaning now all userscan only view the port connection.6. Log in the device connected to the port, and try interacting with the device using the RSCpanel.7. Refer to: Get Write Access section in Chapter 7 for details.8. To relinquish write lock in the RSC window, select Emulator Æ Write Unlock, and the iconon status line will display Write Access again, meaning any other privileged users will re-gain Write Access now.Case 4. Configuring LDAP1. Purpose: To configure DSX to use LDAP/Active Directory server for login authentication.2. After logging in SX via a web browser, select Setup Æ Remote Authentication.3. If the LDAP server has a backup server, enter same parameters (except the IP address) for thesecondary LDAP server.4. Click OK to commit changes.5. Refer to: Configuring LDAP section in Chapter 6 for details.Case 5. Creating Power Association Group1. Purpose: To associate the target server with more than one power outlets physicallyconnected to it.2. After logging in SX via a web browser, make sure a power strip has been configuredpreviously (To add a power strip: click Add on Setup Æ Power Strip Configuration page. SeePower Strip Configuration section in Chapter 14 for details). Then, click Add on Setup ÆPort Power Association List page.3. Select the SX port connected to the dual-powered server device that you wish to associateoutlets with from the drop-down menu of Port, and enter a description for it, such as “InternalWeb Server Pronto” (see Port Power Association section in Chapter 14 for details).4. Select the Power Strip and outlet from the drop-down menu to match how the device isconnected to power. Then click on Add button and the information will appear in the text boxas “[Power Strip Name] \ [outlet 1]”. Select the same power strip and another outlet, thenpress Add button to add it. Another line will display in the text box as “[Power Strip Name] \[outlet 2]”. Click OK to commit the changes.5. Click Add on Setup Æ Power Association Groups List page (See Power Association Groupssection for details).6. Enter a group name and description, then the port ID from the “Available” box (multipleselection is permitted), and click Add button to add to the “Selected” box.7. Click OK to commit changes.8. Refer to: Power Strip Configuration section for details on how to add power strips to DSXmanagement first. If this wasn’t already done, refer to Port Power Associations section tomap power strip outlet to a target server connected to a DSX serial port, and then refer toPower Association Groups section for details on how to group multiple power outletsphysically connected to that same target server.Case 6. Performing Factory Reset on DSX1. Purpose: To set DSX configuration back to factory defaults through GUI.2. Log in SX via a web browser with your login username and password, such as(admin/raritan).
