CHAPTER 2: I NSTALLATION 5Initial Software ConfigurationFigure 4 Hardware Setup for Initial Software ConfigurationUser Information:This information should be entered for each user, up to 50 user accounts, with at least one administrator foreach Dominion SX unit:• User Name: 32 characters maximum, one character minimum, spaces permitted.• Login Name: 20 characters maximum, one character minimum, no spaces.• User Type:− Administrator: Can modify configuration of the unit, has read/write access to the console window.− Operator: Cannot modify configuration of the unit (except own password), has read/write access tothe console window.− Observer: Cannot modify configuration of the unit (except own password), has read-only access tothe console window.• Information: Any additional information (text) you want associated with this user. Can be 64characters maximum, no minimum, spaces permitted.• Password: Alphanumeric text, 6–16 characters in length, no spaces. The first six characters of thepassword must contain at least two alpha and one numeric character; the first four characters cannot bethe same as the user name.Configuration1. Disable Proxies in the installation computer Web browser.Use “no Proxies” or temporarily add 192.168.0.192 to the list of URLs for which no proxy isconfigured.2. Enable Java™ Applet Execution in the installation computer Web browser.3. Access the unit through your installation computer Web browser on the same subnet by typing theURL https://192.168.0.192 into the address/location field.4. Follow the configuration instructions on the screen.Note: At this point you will enter all of the initial configuration information listed in Pre-ConfigurationNotes.5. The unit will reboot automatically once it has been configured. The unit now has the user-definedconfiguration settings, including a new IP address and is ready to be powered off, disconnected fromthe installation computer, and moved to its intended location.Dominion SX UnitInstallationComputerBrowserCrossoverNetworkCable