Dominion KX III User Station QSG 5QSG-KX3UST-0C-v1.0.1-E 255-62-0010-00 RoHSButton FunctionConnection Properties:This button manages streaming videoperformance over your connection to the targetserver. The settings are stored persistently forthe accessed KVM port.In addition, this button can show informationlike FPS and video resolution.The factory default settings are ideal for mostconnections so it is not recommended tochange the settings unless required.Keyboard:This button shows a list of available hot keymacros and sends the selected macro to thetarget server.Mouse:This button switches between single mouseand various dual mouse modes, orsynchronizes two mouse pointers onscreen.Video Settings:This button adjusts video sensing and colorcalibration settings.Connect Audio and Mass Storage Devices:This button connects or disconnects a virtualmedia drive from the target server, if the targetsupports virtual media.For example, you can mount a CD-ROM orUSB flash drive onto the target server.In addition, you can configure the audioconnection to the target server.Power Control:This button turns on, off or power cycles thetarget server, if a Raritan PDU is connected tothe same KVM switch.View:This button shows several display options,such as Scale Video and Full-Screen Mode.The right group comprises the following shortcut buttons forfrequently-used functions.Button FunctionSynchronize Mouse:This button forces the target server's mousepointer to align with the User Station's in thedual mouse modes.Button FunctionAuto-sense Video:This button forces the video re-sensing toadjust the video display.Send Ctrl+Alt+Del:This button sends the hot key Ctrl+Alt+Del tothe target server to ensure it is interpreted bythat server.Full-Screen Mode:This button displays the target server's video infull screen.Press Ctrl+Alt+F to quit the Full-Screen mode.Fit window to Target:This button resizes the KVM Client window tothe target server's desktop video.For detailed information on the toolbar buttons, see the onlinehelp or user guide.QS RuleBasic Network SettingsThe User Station's default network configuration is set toAutomatic (DHCP) for both IPv4 and IPv6 settings.This section describes basic network configuration only. Referto the online help or user guide for more information.To configure basic network settings:1. Choose Main Menu > System Settings > NetworkConnections.2. In the Network Connections dialog, two default networkconnections are available for the two LAN ports. enp2s0 isfor the LAN port near the power jack, and enp3s0 is for theother.