Raritan KX II Quick Setup Manual

Also see for Dominion KX II: User guide User guide User guide Frequently asked questions Configuration guide

Contents

Raritan KX II Quick Setup Manual Manual pdf 6 page image

Dominion KX II Quick Setup Guide 6QSG-DKX2-v2.3.5-0I-E  255-62-4022-00-RoHSused. If only one power supply is used in your configuration,you can disable automatic detection from the Power SupplySetup page.To enable automatic detection for the power suppliesin use:1. Choose Device Settings > Power Supply Setup. ThePower Supply Setup page opens.2. If you are plugging power input into power supply numberone (left-most power supply at the back of the device),select the Powerln1 Auto Detect option.3. If you are plugging power input into power supply numbertwo (right-most power supply at the back of the device),select the Powerln2 Auto Detect option.4. Click OK.Note: If either of these checkboxes is selected and powerinput is not actually connected, the power LED at the front ofthe device turns red.Creating User Groups and UsersTo add a new user group:1. Open the Group page by selecting User Management >Add New User Group or clicking the Add button from theUser Group List page.The Group page is organized into the following categories:Group, Permissions, Port Permissions, and IP ACL.2. Type a descriptive name for the new user group into theGroup Name field (up to 64 characters).3. Set the permissions for the group. Select the checkboxesbefore the permissions you want to assign to all of theusers belonging to this group.4. Set the port permissions. Specify the server ports that canbe accessed by users belonging to this group (and thetype of access).5. Set the IP ACL. This feature limits access to the KX IIdevice by specifying IP addresses. It applies only to usersbelonging to a specific group, unlike the IP Access Controllist feature that applies to all access attempts to the device(and takes priority).Optional6. Click OK.To add a new user:1. Open the User page by choosing User Management >Add New User or clicking the Add button on the User Listpage.2. Type a unique name in the Username field (up to 16characters).3. Type the person's full name in the Full Name field (up to64 characters).4. Type a password in the Password field and retype thepassword in the Confirm Password field (up to 64characters).5. Choose the group from the User Group drop-down list.The list contains all groups you have created in addition tothe system-supplied default groups. , which isthe default setting, Admin, Individual Group.6. To activate the new user, select the Active checkbox. Thedefault is activated (enabled).7. Click OK.QS R uleStep 5: Launch the KX II Remote ConsoleTo launch the KX II Remote Console:1. Log in to any workstation with network connectivity to yourKX II and Java Runtime Environment® installed (JRE® isavailable on the Java website http://java.sun.com/).2. Launch a supported web browser such as InternetExplorer® or Firefox®.3. Type the following URL: http://IP-ADDRESS, whereIP-ADDRESS is the IP address assigned to your KX II.You can also use https, the DNS name of the KX IIassigned by the administrator (provided that a DNS serverhas been configured), or just simply type the IP address inthe browser (KX II always redirects the IP address fromHTTP to HTTPS.) The Login page opens.4. Type your Username and Password. Click Login.Access and Control Target Servers RemotelyThe KX II Port Access page provides a list of all KX II ports,the connected target servers, their status, and availability.Accessing a Target ServerTo access a target server:1. Click the Port Name of the target you want to access. ThePort Action Menu is displayed.2. Choose Connect from the Port Action menu. A KVMwindow opens with a connection to the target.Switching between Target ServersTo switch between KVM target servers:1. While already using a target server, access the KX II PortAccess page.2. Click the port name of the target you want to access. ThePort Action menu appears.3. Choose Switch From in the Port Action menu. The VirtualKVM Client window switches to the new target server youselected.Disconnecting a Target ServerTo disconnect a target server:1. Click the port name of the target you want to disconnect.The Port Action menu appears.2. Choose Disconnect.QS R ule

/ 7

Related manuals for Raritan Dominion KX II