Raritan MCC8 User Manual

Also see for MasterConsole II MCC16: User manual

CHAPTER 3: O NE-T IER CONFIGURATION 93. To select a computer: Use the <Page Up>/<Page Down> or <Ç>/<È> keys to highlight the desired computer andpress <Enter>OR When the Selection Menu is sorted by Channel ID, press the desired computer's Key number(shown in the left-hand column);OR When the Selection Menu is sorted by name (arranged alphabetically), use the <PageUp>/<Page Down> or <Ç>/<È> keys, or type the first character(s) of the desired Name toquickly jump to the Name that most closely matches what you type. To back up a character,press the <Backspace> key. Highlight the desired computer, and press <Enter>.a. When you select a computer, you automatically return to normal computer operation atthe selected computer.b. The light above the selected Channel button turns from amber to green, and the monitordisplays video from the selected computer.c. The Channel ID and Name will be displayed on the monitor for the time interval specifiedin the Configuration Menu.d. Press <Home> at any time to return to the first page of the Configuration Menu (for 16-channel or two-tier systems).Note: See Appendix X for a list of other Function Keys and how to use them.Setting AutoScanAutoScan activation shortcut: Activate the On-Screen User Interface and press the <F6> Key.The green light next to the <Scan> button on the front panel will be ON and the unit will scanaccording to the parameters set in the Configuration Menu.Operation: Using Front Panel ButtonsWhen the on-screen user interface is not activated, you can operate MasterConsole II from thefront panel.The front panel has a [Scan] button, a [Skip] button, and a series of numbered buttons used toselect channels and to set the Global scan rate.Figure 15 MasterConsole II Front PanelFigure 16 MasterConsole II Front Panel Channel Lights1. To select a computer:a. Be sure the green light next to the [Scan] button is OFF (toggle ON/OFF).b. Press the numbered button corresponding to desired channel.