Power Management1123. Highlight the connected Power Strip and press G to enter the “OutletConfiguration” Menu. The physical outlet number corresponds to thenumber in the “Ch. ID” column.4. In the “Type” column, highlight an outlet and press Enter toconfigure the device type: PWR: This is the default association type and refers to devices notconnected to the Paragon II system (a router or a monitor). CPU: Select this type for all devices connected to the Paragon IIsystem (including “non‐server” devices such as Paragonswitches).5. Press Î to highlight the name field. Then press Enter to configure thename of a device associated with that outlet. If the type is set to PWR, users will be able to change the name ofthe device as desired. If the type is set to CPU, the OSUI will request you to savechanges (“Y/N/ESC”), and then displays a “Select PoweredDevice” menu. This is an alphabetized list of all devicesconnected to the Paragon II system, allowing the user to indicatewhich device is powered by the newly configured outlet.Highlight the desired device and press Enter.6. The selected device (if any) will be automatically associated with thatpower outlet. The outlet name will be the name of the selected server.Press S to save the configuration.7. Press Î to scroll to the next page of the configuration menu forsetting security groups for a power outlet. See Group Settings (AccessRights) (on page 102) for more information on setting access rights.This allows administrators to limit who is authorized to controlpower to various devices. The default setting for each group on thatoutlet is “‐ ‐“, which means no accessibility to any user other than theAdmin user. Note, once a group ID setting is changed, it can neverreturn to the original “‐ ‐“ state.
