Rascal Balance 600 B Owner's Manual

Contents

Rascal Balance 600 B Owner's Manual Manual pdf 22 page image

Rascal 600B/700B Owner’s ManualEMC Part: 19278100 Rev. 3 ◦ 06/29/200921Adjusting the Dash and Handlebar PositionsBoth the dash and handlebar include adjustments to allow them to bepositioned according to your individual riding style. The angle of the dashcan be adjusted up or down for maximum comfort and easier use of dashcontrols. The entire handlebar assembly can also be adjusted through amovable handle at the base of the lower handlebar. Dash and handlebaradjustments are shown in Illustrations 7 and 8.Adjust dash angles so that your elbows can rest on the arm pads while youoperate your Rascal and you can see the dash controls.• Sit in seat facing forward.• Lift dash to upright position to access adjustment screw.• Locate adjustment screw. Use Allen key (supplied) to turn screwclockwise to lower the angle or counterclockwise to raise dash angle.Adjust handlebar positions so that the handgrips are within comfortablereach.• Sit in seat facing forward.• While holding the handlebar, reach down to the base and loosen thelocking adjustment handle by turning handle counterclockwise.• When at desired angle, tighten locking handle by turning clockwise.Note: Lever can be positioned out of the way by pulling lever out andmoving it away from rider. Release lever and it will lock in place.7 8ILLUSTRATIONS 7 & 8 – Dash and Handlebar Positions