Safety instructionsV-12 - 02/2018 - PM/Stme - English - © RATIONAL 11 / 153Warning!- There is a danger of injury when moving the cover, locking (for pressure cooking, not 112T,112L) or tilting the pan.- If there are sudden movements when closing or opening the cover, please open the covercarefully and do not activate the lock. Immediately inform your Service partner. In this casethe following warning sign must be attached to the unit order to inform all users. Warning!Cover mechanism defective. Do not move the cover! – Danger of injury!- Do not place any objects on the cover or in its swivelling range.- If mobile units are not to be moved, the wheel locking brakes must be applied. Units mayroll away on uneven floors – Danger of injury!- Do not operate the unit in pressure mode (option) if it is mounted on rollers (option) -Danger of injury!- Oil carts, basket carts, VarioMobil ®and units mounted on rollers may tip over duringtransport on an inclined plane or threshold – Danger of injury!- When installing the VarioCookingCenter ®112T, 112L with screwed-on feet a pinch pointis created at the basin leading edge - risk of injury- Position the core temperture sensor on the lid. Please ensure that the point is notprotruding - danger of injury!- Do not allow the lever of the pan vent (112T, 112L) to snap back, as hot water or oil maysplash - danger of burning!Safety instructions for deep fryingDanger!- Do not extinguish burning fat and oil with water – Danger of explosion!- Do not add water to fat – Danger of explosion!- Do not use the hand shower when working with hot oil - Danger of explosion!- Only use the VitroCeran (option, not 112T, 112L) if it is secured by the frame or with thebain-marie (see the "Unit accessories" section). Make sure that no liquid sprays into thepan - Danger of explosion!- Do not use pots or pans with handles on the VitroCeran (option, not 112T, 112L) or placeon the user console. Danger of tipping when the cover is closed and when the pan ismoved – Danger of explosion!- Do not drain any oil through the integrated basin outlet - risk of explosion!- If hot oil is drained through the basin outlet, damage can be made to the structure. Noliability is assumed for this.