2Manual No. 016-0159-831 9IntroductionFor Example:Based on these calculations and a PSI of 30, tip XR8004 should be selected since it comes closest toproviding the desired output.Verifying Flow Rate LimitsThe flow rate of spray must be within the specified range for the flow meter being used.*Note: Only Krohne Magmeters sold through Raven Industries should be used with Raven controllers. Noother Krohne Magmeters are supported.Nominal Application Pressure 30 PSI (kpa)Target Application Rate 20 GPA (lit/ha)Target Speed 5.2 MPH (km/h)Nozzle Spacing 20 inches (cm)20 GPA x 5.2 MPH x 20 inches = .35 GPM5,940Flow Meter Model Flow RangeRFM 5 0.1 - 5 GPM [0.2 - 18.9 lit/min]RFM 15 0.3 - 15 GPM [1.1 - 56.8 lit/min]RFM 60P 1 - 60 GPM [3.8 - 210 lit/min]RFM 60S 1 - 60 GPM [3.8 - 210 lit/min]RFM 100 5 - 100 GPM [18.9 - 380 lit/min]RFM 200/200 Poly 15 - 200 GPM [56.8 - 760 lit/min]Magmeter 200 3 - 200 GPM [11.36 - 757 lit/min]RFM 400 25 - 400 GPM [94.6 - 1515 lit/min]Krohne 3β Magmeter* 15 - 250 GPM [56.78 - 946.25 lit/min]Krohne 4β Magmeter* 35 - 1,800 GPM [132.48 - 6813 lit/min]Krohne 6β Magmeter* 70 - 3,000 GPM [264.95 - 11,355 lit/min]