Raven SmarTrax 117-5031-001 Installation Manual
                                   |
3Manual No. 016-5031-001 Rev. C 13Hydraulic System InstallationFIGURE 5. Pressure Hose Installed2. Install a -12 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-029) in the open pressure port.3. Connect the machine’s pressure hose to the opposite end of the installed tee fitting.4. Install a -12 ORFS (F) to -8 ORFS (M) reducer adapter fitting (P/N 333-0012-030) on the 90° end of theinstalled tee fitting.5. Install the 90° end of the supplied hydraulic hose (P/N 214-1000-912) on the installed reducer fitting.6. Connect the straight end of the installed hydraulic hose to the fitting installed in Port P of the SmarTraxvalve (P/N 334-0003-089).Install the Tank Hose1. Disconnect the machine’s tank hose from the tank port of the steering orbital.FIGURE 6. Tank Hose Installed2. Install a -12 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-029) on the open tank port on thesteering orbital.3. Connect the machine’s tank hose to the opposite end of the installed tee fitting.4. Install a -12 JIC (F) to -8 JIC (M) reducer adapter fitting (P/N 333-0012-063) on the 90° end of the installedtee fitting. |
Related manuals for Raven SmarTrax 117-5031-001
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine