Chapter 8: Sirius Audio (US only) 101Browsing channelsThe browse function allows you to view play data for channels with-out tuning to them.To browse channels1. On the Sirius Audio Control screen, press the BROWSE softkey.Pressing this key displays the Channel List or Preset List forbrowsing. Toggle between the two lists with the VIEW ALL/PREsoftkey.2. Use the trackpad to scroll through the channels.3. Press the TUNE TO CHANNEL softkey to listen to the selectedchannel.4. Press OK. to go back to the Sirius Control screen.Filtering categories from the browseThis feature allows you to choose a category from which to browsechannels; other categories are excluded from the browse.To filter categories1. On the Browse screen, press the FILTER BY softkey.2. Press the SELECT CATEGORY softkey.3. Using the trackpad, select the category you want to browse.4. Press OK.Scanning channelsThe Scan function automatically tunes to all channels in turn.To scan channels1. Press the SETUP CHANNELS softkey.2. Select SCAN CHANNELS.3. Use the SCAN ALL/PRE softkey to choose to scan all channelsor only preset channels.4. Press SELECT to stop the scan and listen to the active channel.Hiding or showing channels and categoriesYou can select particular channels and categories to be excluded(hidden) from the Browse and Scan sequences.To hide or show a channel or category1. Press the SETUP CHANNELS softkey.2. Select EDIT CHANNEL ACCESS.3. In the channel list, select the channel you want to hide. If youwant to hide a category, select any channel in that category.4. Toggle between hidden and shown states with either theCHANNEL SHOWN/HIDDEN or CATEGORY SHOWN/HIDDENsoftkeys.Trackpad left First channel in the previous category.Trackpad right First channel in the next category.81314-1_A Series Reference Guide.book Page 101 Thursday, August 28, 2008 9:23 AM