To set up the Dangerous target alarm, first adjust the Safe distance to the desired value and thenselect a Time to reach safe distance. The alarm will be triggered if a tracked target will reach thespecified Safe distance from your vessel within the time period selected.You can select whether you want the Dangerous target alarm to track Radar targets, AIS targets orboth.You can display a Safe distance ring around your vessel in the Radar app using the Show safedistance control.Radar settingsWhen the Radar layer is enabled in the Chart app you can configure the Radar settings from theTargets menu: Menu > Targets > Radar settings.Setting Description OptionsRadar selection When more than 1 Radarscanner is connected you canchoose which Radar to use forthe Radar layer in the Chartapp.List of available Radar scannersTransmit Start the Radar scannertransmitting or put it in Standby.• On• OffDual range Enables and disables dualrange on compatible Radarscanners• On• OffChannel When Dual range is active, youcan switch between channels.• 1• 2Show Radar overlay Enables and disables the Radarlayer in the Chart app.• On• OffVisibility Determines the visibility(opacity) of the Radar layer.• 0% to 100%Palette Selects the color used for theRadar layer• Purple• Black• RedUse Radar without headingdataEnables use of Radar layerwhen Heading data is notavailable.• On• OffRange Determines the range used forthe Radar layer.Radar range valuesAIS settingsWhen the AIS layer is enabled in the Chart app you can configure AIS settings from the TargetsmenuMenu > Targets > AIS settings.Setting Description OptionsShow AIS targets in chart Enables and disables AIStargets in the Chart app.• On• OffEnhanced AIS targets Enables and disables display ofenhanced AIS target icons.• On• OffShow these AIS types Determines the types of AIStarget displayed in the Chartapp.• All• Dangerous• BuddiesChart app 69
