Raymarine GVM400 Installation Instructions Manual
Also see for G-Series system: Installation & commissioning instructionsQuick reference guideInstallation instructionsQuick referenceInstallation instruction
                                  | |
Contents
|
1. GVM video module.2. SeaTalkhs switch.3. G-Series and SeaTalkhs devices.4. S-Video source (for example, video camera).5. S-Video connection (using the supplied R08274 S-Videoadaptor cable).6. Stereo audio connection (using the supplied R08275 audiocable). Only the S-Video and Composite 4 inputs support anassociated audio connection.7. Composite video source (for example, video camera).8. Illustration showing the labels for the video and audioconnections on the GVM video module.Note: Each GVM400 video module supports 1 S-Video input, or4 composite video inputs (reduced to 3 composite video inputsif using S-Video input). If a thermal camera is connected to aGVM video module no further video devices may be connected tothat GVM unit. The G-Series system supports a maximum of 3GVM video modules, providing a total of 12 video inputs (less ifconnecting S-Video or thermal camera devices).Video cablesCables for connecting video sources to the G-Series system.Cable Part number Notes1.5 m (4.9 ft) S-Videoadaptor cableR08274 Supplied with the GVMvideo module.Note: Refer to your dealer for suitable cables for connectingcomposite video sources to the G-Series, and also for connectingS-Video sources to the adaptor cable listed above.Audio cablesCables for connecting audio to the G-Series system.Cable Part number Notes1.5 m (4.9 ft) stereoaudio cableR08275 Supplied with the GVMvideo module.3 m (9.8 ft) stereo audiocableR08266 Supplied with the GPMprocessor unit.15 m (49.2 ft) stereoaudio cableR08298Cables and connections 19 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine