Raymarine Pathfinder GyroPlus 2 Owner's Handbook Manual

6 Pathfinder Smart Heading System - Owner’s Handbook2 InstallationTools required• drill and 3 mm (1/8 in) drill bit• cross-head/pozi-drive screwdriver• small flat-bladed screwdriver (for GyroPlus 2 unit terminals)• wire-strippers• hand bearing compass (to help identify suitable fluxgate location)Parts requiredAdditional parts requiredIn addition to the parts supplied you may also require:• suitable 2-core cable for NMEA output to Pathfinder Plus• suitable power cable and 3 A fuse/circuit breaker (if required)• additional SeaTalk cables (if required)Cabling guidelinesWhen running cables, always observe the following guidelines:• if a cable has to be fed through the deck, use a good quality deck gland• where cables are fed through holes, use grommets to prevent chafing• secure long cable runs so they do not present a hazard• wherever possible, route cables away from fluorescent lights, enginesand radio transmitting equipment, as these may cause interference!COMPASS AREANo 8 x 1 inch pan-headself-tapping screws (x6)Cable ties (x6)Compasswarning labelFluxgate compasswith 8 m (26 ft) cableGyroPlus 2 unitSmart Heading System - parts supplied2 m (6 ft 6 in) SeaTalk cable(plug at one end, bare ends at other end)D5914-1Also packed: Owner's Handbook (including warranty information) & Worldwide Distributors List