Raymarine SPX 10 Installation Manual

Also see for SmartPilot SPX-10: Installation instructions Setup guide

Raymarine SPX 10 Installation Manual Manual pdf 23 page image

Chapter 2: System overviews 15SeaTalk system with dedicated power supplyYou can use a separate power supply to power the SeaTalk system if required. In thisinstance do NOT connect the SeaTalk RED wire at the SPX SmartPilot SEATALKterminal.NMEA 0183 / other manufacturers’ equipmentMost Raymarine equipment will connect to your data system via SeaTalkng or SeaTalk(except for A-series, which connects via NMEA 0183). Other manufacturers’equipment connects via NMEA cabling.Instrument SeaTalkbus 12 V power supply(via breaker/fuse ratedat 5 A or less)SeaTalk cableSeaTalk instrumentsSmartPilotcontrollerSeaTalk busSmartPilotcomputerSMARTPILOTCourse computerpower supply(via breaker/fuse)D10440-1ScreenDo not connect Red wire(Cut back and insulate)Yellow