Raymarine SmartPilot SPX-10 Installation Instructions Manual

Also see for SmartPilot SPX-10: Installation guide Setup guide

Raymarine SmartPilot SPX-10 Installation Instructions Manual Manual pdf 27 page image

3.5 Fuses and circuit protectionPower supply circuit protectionThe power supply must be connected using an appropriately ratedand fused switch or thermal breaker. The drive type determines therating of the breaker or fuse required.Drive unit Supply voltage FuseThermalover-currentcircuit breaker0.5 l hydraulicpump12 V 15 A 10 AType 1 (Rotary,Linear orHydraulic)12 or 24 V 25 A 20 A12 V 40 A 30 AType 2 (Rotary,Linear orHydraulic) 24 V 30 A 30 AType 3 (Hydraulic linear)12 V or 24 V 40 A 30 AI/O 12 V 15 A 10 ACR pump(Solenoid)12 or 24 V 10 A 10 AInternal fusesThe course computer uses standard automotive blade fuses. Sparefuses are located on underside of the removable cover.RaymarineGROUNDP OWERP OWERP OWER12VOFF ON24VFLUXGATE RUDDER CLUTCHFAULTSLEEPFAULTMOTORA BD11937-121 31. SeaTalkng fuse. (Fuse power supply from course computer toSeaTalkng backbone.2. SeaTalk fuse. (Fuse power supply from course computer toconnected SeaTalk devices).3. Power fuse. (Fuse total power consumed by system, includingthe drive unit.)SeaTalkng SeaTalk PowerSPX-10 2 A 2 A 15 ASPX-30 3 A 3 A 40 ASOX-SOL 3 A 3 A 15 ACables and connections 27