14.13 Fishfinder alarmsThe display can be configured to provide a number of fishfinderalarms.The following fishfinder alarms can be set when a DSM is detected,or when the simulator is on:• Fish — alarm sounds when a target meets the specified sensitivitylevel and, is within the depth limits (if enabled). The greater thefish alarm sensitivity, the greater the number of target imagedepths displayed.• Fishfinder Deep — alarm sounds when the DSM detects that thedepth is greater than the deep limit.• Fishfinder Shallow — alarm sounds when the DSM detects thatthe depth is less than the shallow limit.Setting up fish alarmsThe fish alarms are configured from the alarms menu.From the homescreen:1. Select Set-up.2. Select Fish.The Fish alarms menu is displayed.3. Select Fish so that On is highlighted.4. Select Fish Sensitivity.5. Use the Rotary Control to adjust the fish sensitivity to therequired setting.The greater the fish alarm sensitivity, the greater the number oftarget image depths displayed.6. Select Fish Depth Limits so that On is highlighted.The shallow and deep fish limit settings will be activated in themenu.7. Select Shallow Fish Limit.8. Use the Rotary Control to adjust the shallow fish limit to therequired setting.9. Select Deep Fish Limit.10.Use the Rotary Control to adjust the deep fish limit to therequired setting.Setting up fishfinder deep alarmFrom the homescreen:1. Select Set-up.2. Select Alarms.3. Select Fishfinder Deep.4. Select Deep so that On is highlighted.Selecting Deep will switch between On and Off.5. Select Deep Limit.6. Use the Rotary Control to adjust the setting to the requiredvalue.7. Press the Ok button to confirm value.Note: The Deep Limit cannot be set to less than the ShallowLimit.Setting up fishfinder shallow alarmFrom the homescreen:1. Select Set-up.2. Select Alarms.3. Select Fishfinder Shallow.4. Select Shallow so that On is highlighted.Selecting Shallow will switch between On and Off.5. Select Shallow Limit.6. Use the Rotary Control to adjust the setting to the requiredvalue.7. Press the Ok button to confirm value.Note: The Shallow Limit cannot be set to greater than the DeepLimit.168 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127
