Raymarine i40 Installation And Operation Instructions Manual

Also see for i40: Installation and operation instructions Installation and operation instruction manual

Contents

Raymarine i40 Installation And Operation Instructions Manual Manual pdf 19 page image

Item Cable color Signal name1 Black Piezoceramic –2 Blue Piezoceramic +3 Screen 0 V (shield)i40 Speed connection1 2 3 4 5 D12352-1Item Cable color Signal name1 Brown Temperature 0 V2 White Temperature (signal)3 Screen Speed 0 V (shield)4 Green Speed (signal)5 Red Speed V+i40 Wind connectionD12353-11 2Item Cable color Signal name1 Red Rotor +2 Blue Rotor –Making transducer connections3 mm6 mm50 mm12D12359-11. Prepare the cable as shown in 1 above.2. Fold back the wire strands and insert into the new spadeconnector as shown in 2 above.3. Ensure the wire strands do not extend beyond the rear of thespade connector insulation.4. Crimp the connector to the wire.4.3 Power connectionA SeaTalk system requires one 12 V dc supply, connected to theSeaTalk backbone. This can be provided:• By a battery via the distribution panel, or• From a Raymarine course computer, via SeaTalk or SeaTalkng.Power connection exampleDirect power connection+_D12355-12131 3 A circuit breaker or fuse.2 SeaTalk power cable.3 12 V dc vessel power supply.SeaTalk power connectionSeaTalk SeaTalk+_D12354-1211 5 A circuit breaker or fuse.2 12 V dc vessel power supply.SeaTalk power protectionRaymarine recommends that the power is connected to a SeaTalksystem in such a way that the current drawn on each side of thepower connection point is equal.Warning: Grounding not requiredThis product is fully insulated and does NOT requireseparate grounding.Warning: Positive ground systemsDo not connect this unit to a system which has positivegrounding.Cables and connections 19