Raymarine i70 Installation & Operation Instructions

Also see for i70: Installation and operation instructions Installation instructions User manual Installation instructions Quick reference

Contents

Raymarine i70 Installation & Operation Instructions Manual pdf 30 page image

• all the displays in that group to be synchronized.Assigning A Network GroupTo enable the Shared Brightness and Color, unit’smust be assigned to the same network group.Compatible Instrument Displays and Pilot Controllerswill also share their Color Scheme.From the Network Group menu: (Menu > Set-up >System Set-up > Network Group)1. Select the Network Group that you want to assignthe unit to.A list of network groups will be displayed:• None (default)• Helm 1• Helm 2• Cockpit• Flybridge• Mast• Group 1 — Group 52. Select Brightness/Color Group.3. Select This Group.4. Select Sync.The System will now synchronize all unitsassigned to the same group.5. Select OK.6. Carry out steps 1 to 5 on all unit’s.The location of the Shared Brightness menuon LightHouseTM MFDs is: (Homescreen >Customize > Display Preferences > SharedBrightness)Adjusting the Brightness level will now effect all unitsassigned to the same group.Unsharing a unitInstrument Displays and Pilot Controllers can beremoved from the Shared Brightness.1. Press the Power button to display the SharedBrightness page.2. Select Unshare.Selecting Share from the Display Brightnesspage will switch back to Shared Brightness.Changing the color schemeFrom the colors menu: (Menu > Display Settings >Colors)1. Select a color scheme from the list• Day 1• Day 2• Inverse• Red/BlackIf the unit is part of a network group, the colorscheme selected will change on all units that supportcolor schemes and are part of the same group.Display responseSetting the Display ResponseSetting the Display Response to a low value willdampen data fluctuations to provide a more stablereading. Setting the Display Response to a highvalue will reduce then damping to make readingsmore responsive.From the Display Settings menu: (Menu > DisplaySettings )1. Select Display Response.2. Select the data type:• Speed• Depth• Wind speed• Wind angle• Heading3. Adjust the value as required.4. Select Save.38