User Manual145.22 Network SetupNetwork Setup allows you to prepare the DVR for viewing over the internet or local network.IMPORTANT: This setting should only be changed if multiple DVRs are being setup on the samenetwork and the first code “00” must not to be changed.MAC ADDRESS: In a local area network(LAN),the MAC (Media Access Control) address is yourcomputer’s unique hardware identity code(On anEthernet LAN,it is the same as your Ethernetaddress).When you are connected to the Internetfrom your computer (or host as the Internetprotocol thinks of it ),a corresponding table relatesyour IP address to your computer’s physical(MAC) address on the LAN.IP ALLOCATION: DVR supports DHCP andStatic IP modes. If your modem/router supportsDHCP function, you can use DHCP mode. Whenusing STATIC mode, you will be required to setupyour IP settings manually.Note: After setting the DVR to DHCP moderestart the unit.IP Address: In a local network, the IP addressis a unique designated address for your DVRrecognized by your router. Ensure this number iswithin the range usable by your modem/router.Use the UP “▲” and DOWN “▼” buttons tomove the cursor and use the “SELECT” button tochange the numbers. Once you have finished thechanges restart your DVR.SUBNET MASK: Subnet Mask is used todetermine what subnet an IP address belongs to. Anumber that is used to identify a sub network sothat IP addresses can be recognized on a local areanetwork. Consult your modem/router for yourLAN’s subnet mask.NETWORK SETUPMAC ADDRESSIP ALLOCATIONIP ADDRESSSUBNET MASKGATEWAYDNS1 ADDRESSDNS2 ADDRESSHTTP PORTUSER SETUPDDNS SETUP(HTTP PORT) 80, 1024-49151( )MOVE (SEL)SELECT (MENU)EXIT<00:11:22:33:44:55>[STATIC][192.168.1.100][255.255.255.0][192.168.1.1][0.0.0.0][0.0.0.0][ 80]NETWORK SETUPMAC ADDRESSIP ALLOCATIONIP ADDRESSSUBNET MASKGATEWAYDNS1 ADDRESSDNS2 ADDRESSHTTP PORTUSER SETUPDDNS SETUP(HTTP PORT) 80, 1024-49151( )MOVE (SEL)SELECT (MENU)EXITNETWORK SETUPMAC ADDRESSIP ALLOCATIONIP ADDRESSSUBNET MASKGATEWAYDNS1 ADDRESSDNS2 ADDRESSHTTP PORTUSER SETUPDDNS SETUP(HTTP PORT) 80, 1024-49151( )MOVE (SEL)SELECT (MENU)EXITNETWORK SETUPMAC ADDRESSIP ALLOCATIONIP ADDRESSSUBNET MASKGATEWAYDNS1 ADDRESSDNS2 ADDRESSHTTP PORTUSER SETUPDDNS SETUP(HTTP PORT) 80, 1024-49151( )MOVE (SEL)SELECT (MENU)EXIT<00:11:22:33:44:55>[STATIC][192.168.1.100][255.255.255.0][192.168.1.1][0.0.0.0][0.0.0.0][ 80]<00:11:22:33:44:55>[STATIC][192.168.1.100][255.255.255.0][192.168.1.1][0.0.0.0][0.0.0.0][ 80]<00:11:22:33:44:55>[STATIC][192.168.1.100][255.255.255.0][192.168.1.1][0.0.0.0][0.0.0.0][ 80]