Razor A-type Owner's Manual

Also see for POWER A 2: Owner's manual Owner's manual Owner's manual Owner's manual Quick start guide

Contents

Razor A-type Owner's Manual Manual pdf 4 page image

3Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact informationat www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Servicecontact information is listed at the back of this manual.ASSEMBLY AND SET-UP3 Make certain BOTH handlebarsare properly locked onto the T-bar.2 Insert and secure the leftand right handlebars by pressingthe spring-loaded buttons andinserting them into the T-bar.1 To release the folding mechanism,place the scooter on the ground, putone foot on the deck plate and pushjoint release lever down. Raise T-barup until it is securely locked in theupright position.Note: The joint release leveris spring-loaded and willautomatically lock in the uprightposition when fully upright.WARNING: Failure toproperly engage the spring-loadedbuttons may cause the handlebarsto dislodge while riding and maycause you to lose control andfall. When correctly engaged thehandlebars will not rotate nor willthey move sideways. Note thatwhen properly engaged, the spring-loaded buttons are clearly visible inthe holes on the T-bar.WARNING:Keep fingers clear of the pivotingmechanism when folding orunfolding the scooter. Make sureothers are standing clear.Unfolding the Scooter for First Time Use(Select models)Attaching the Handlebars(Select models)2 With the front wheel pointedstraight ahead and thehandlebars square to the frontwheel and the Razor logo facingthe front, tighten the clamp asshown. Tighten securely. On theA4, alternately tighten each boltuntil securely tightened.1 Loosen the collar clamp andslide it upward. Insert T-bar intothe fork until it bottoms out on theheadset locknut.Note: If necessary, carefully twistthe T-bar clock-wise while pushingdownward until T-bar bottoms outon the headset locknut.WARNING: Failure toproperly install and tighten thecollar clamp may cause the riderto lose control and fall. If you arehaving difficulty understandingthese instructions, pleasecontact Razor Customer Servicefor assistance.WARNING: Do notattempt to thread the handlebar into the front fork thread.Tighten clamp securely.