Razor Ground Force Owner's Manual

Also see for Ground Force: Owner's manual Owner's manual CONTROLLER INSTALLATION GUIDE Owner's manual

Contents

Razor Ground Force Owner's Manual Manual pdf 3 page image

BEFORE yOU BEGIN2WARNING:DO NOT USE NON-RAZORPARTS WITH YOURGROUND FORCE.The Ground Force has been built tocertain Razor design specifications.The original equipment suppliedat the time of sale was selectedon the basis of its compatibilitywith the frame and all other parts.Certain aftermarket componentsmay not be compatible. Use of non-Razor parts will void the warranty.WARNING: Turn powerswitch off before conducting anymaintenance procedures.q Required Tools(2) 5mm Allen wrench3mm Allen wrench(included)8/10/19mm wrench(not included)13/17mm wrench(not included)Screwdriver(not included)Need Help? Visit our web site for replacement parts, product support and a list of authorized service centersat www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.Remove contents from box. Remove the foam separators that protect the components from damage duringshipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may haveoccurred during shipping. Because the Ground Force was 95 percent assembled and packed at the factory,there should not be any problems, even if the box has a few scars or dents.Estimated Assembly and Set-Up TimeRazor recommends assembly by an adult.Allow up to 45 minutes for assembly, not including initial charge time.Allow up to 12 hours for initial charge (see page 5 for charging information).Speed Control / Thumb ThrottleSteering WheelWheelCharger PortTie RodBrake Adjustment(Auxiliary)Chain AdjusterBrake LeverChargerPlugChargerPortOn/Off SwitchCharger(Note: Charger design mayvary from one shown)