Remove contents from box and check parts against part diagram below. Remove the foam separators that protect thecomponents from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinkedcables that may have occurred during shipping. Because the Rip Rider 360˚ was partially assembled and packed at thefactory, there should not be any problems, even if the box has a few scars or dents.❑ Estimated Assembly and Set-Up TimeRazor recommends assembly by an adult with experience in bicycle mechanics.Allow up to 15–20 minutes for assembly.BEFORE YOU BEGIN2WARNING: DONOT USE NON-RAZORPRODUCTS WITH YOURRIPRIDER 360˚.The RipRider 360˚ has been built tocertain Razor design specifications.The original equipment supplied atthe time of sale was selected onthe basis of its compatibility withthe frame, fork and all other parts.Certain aftermarket products mayor may not be compatible.❑ Required ToolsSome tools are supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied tools only as alast resort.Need Help? Visit our web site for replacement parts, product support, live chat and a list ofauthorized service centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday8:00 AM - 5:00 PM Pacific Time.(2) 5mmhexagonal key wrenches(included)Bicycle-style tire pumpfor Schrader valve tires,with pressure gauge10mm, 13mm and 15mmopen end wrenches(included)Front Fork AssemblyFront Wheel AssemblySeatRear CastorWheelsSteering BoltFront Caliper BrakeLocknutAllen Socket ScrewWasherAllen Long ScrewCombinatory NutWasherAllen Socket ScrewLeft PedalRightPedalFrameAssembly