Recon Snow2 User Manual
Also see for Snow2: User manual
                         | |
16 | P a g eBATTERYSnow2 Battery (3.7V Lithium Polymer Rechargeable)A full charge of the battery of your Snow2 lasts from 5-6 hours, even at temperatures as low as -10°C / 14°F.Usage under temperatures equal to or below -20°C / -4°F will mean that battery depletion occurs at a faster rate.Tip: Preserve battery life on your Snow2 by turning off the display. To do this, open the Quick Nav menu and pressDOWN on your remote to access Power Options then select Display Off.Note: The battery performance of your Snow2 will vary depending on the amount and / or activity of connectedBluetooth devices (ex: Smartphone, Third Party Hardware such as POV cameras, Heart Rate Monitors, etc.)Never attempt to service the Snow2 yourself – this includes attempting to remove or replace the lithium battery.REMOTE BATTERYThe remote which accompanies your Snow2 connects to the HUD via BLE sensor technology. This is a very low energyconnection, allowing you to navigate your HUD with ease. Please be aware that you may need to replace the remote’ssingle three-volt CR2032 battery approximately once every three years.To replace the battery on the remote:1. Remove the battery cover found on the underside of your remote.2. Using a coin or flathead screwdriver, turn the cover counter clockwise until you reach the unlock symbol.3. Remove battery and insert a replacement.4. Replace the battery cover on the back of the remote.5. Using a coin or flathead screwdriver, turn the cover clockwise until the arrow aligns with the closed lock symbol.Fully Charged BatteryNearly Fully Charged BatteryPartially Charged BatteryLow BatteryExtremely Low BatteryNo Charge LeftBattery is charging via USB to micro-USB cable |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine