Recordex TechDisc Pro User Manual
                                      | |
6©2007 Recordex USA, Inc. All rights reserved.Version: 1.2User’s Guide Recordex TechDisc Pro CD® TMCustomer SupportYour duplicator was subjected to rigorous quality control testing and inspection, however, if your system is not working prop-erly please contact our support department so we can ensure that your duplicator is running properly. We strive to buildthe best product possible and we desire that every customer feel confident recommending Recordex products to theirfriends. If you are not fully satisfied please call our Customer Service Center today and we will do our best to make thingsright.Customer Service CenterRecordex USA, Inc.PO BOX 848105 North Anderson DriveSwainsboro, GA 30401P. 1-478-237-5501F. 1-478-237-5504Safety PrecautionsPlease read through these important safety precautions and recommendations before setting up your duplicator toensure safe and trouble free operation.Duplicators are high-precision electronic devices. Do not use them in any manner other than as specified in thisuser’s guide.To prevent fire, shock, or other health risks do not expose the unit to moisture or rain.To prevent electronic shock do not attempt to disassemble or modify the duplicator or any of its internal compo-nents. Refer all servicing to authorized service centers.The internal drives utilize a laser beam that can be harmful to eyes. Do not disassemble the unit. Do not attemptto look through the front panel of the drives while the unit is powered on.Do not attempt to look into the unit while the unit is powered on as eye-damage could occur if dust or other parti-cles are forced out of the fan vents and into your eyes.The duplicator warranty will become void if the unit is modified or serviced by unauthorized personnel.Operating EnvironmentBefore unpacking your duplicator select an appropriate operating environment for your system. You should look for anarea that meets these criteria:∑ A level and stable work surface,∑ In an area with good ventilation, low dust and no smoke,∑ With moderate temperature and humidity,∑ And access to an outlet with stable powerConsider using an uninterruptible power supply with surge protection (UPS) to protect your duplicator.You’re duplicator is able to operate in both 115 and 230V environments. The factory default is 115V but if youlive an a region of the world that operates at 230V you can simply switch the voltage setting to 230V using asmall screwdriver (see figure 1.1).!!!!!!!i2 |
Related manuals for Recordex TechDisc Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine