Red Hat ENTERPRISE LINUX WS 2.1 Installation Manual

Contents

Chapter 3. Installing Red Hat Enterprise Linux WS 453.22.1. Video Card ConfigurationXconfigurator will now present a list of video cards for you to choose from.If you decided to install the X Window System packages, you now have the opportunity to configurean X server for your system. If you did not choose to install the X Window System packages, skipahead to Section 3.23.If your video card does not appear on the list (see Figure 3-20), X may not support it. However, if youhave technical knowledge about your card, you may choose Unlisted Card and attempt to configureit by matching your card’s video chipset with one of the available X servers.Figure 3-20. Video Card SetupNext, enter the amount of video memory installed on your video card. If you are not sure, pleaseconsult the documentation accompanying your video card. You will not damage your video card bychoosing more memory than is available, but the X server may not start correctly if you do.If you decide that the values you have selected are incorrect, you can click the Restore original valuesbutton to return to the suggested settings.You can also select Skip X Configuration if you would rather configure X after the installation or notat all.3.23. Preparing to InstallYou should now see a screen preparing you for the installation of Red Hat Enterprise Linux WS.For your reference, a complete log of your installation can be found in /tmp/install.log once youreboot your system.