RedMax LRT-EX850 Operator's Manual

Contents

1. Use a grease gun to fill with grease.Note: New products are first filled with grease afterapproximately 20 hours of operation, andsubsequently approximately every 60 hours ofoperation. Use special grease, no. 503 98 96-01.The grease in the bevel gear does not normally needto be changed except if repairs are carried out.To clean and lubricate the cutter1. Clean any resin and plant residue from the bladesusing cleaning agent 531 00 75-13 (UL22) beforeand after using the product.2. Lubricate the blade bars with special grease, part no.531 00 75-12 (UL 21) before long periods of storage.Technical dataTechnical dataLRT-EX110 LRT-EX850WeightWeight, kg/lbs 0.9/2.0 0.9/2.0BladesBlade length, mm/inch 550/21.7 550/21.7Speed, blade, rpm 4184 4184Noise emissionsSound power level, measured dB (A) 111 110Sound power level, guaranteed LWA dB (A) 114 113Noise levels1Equivalent sound pressure level at the operator’s ear, measured ac-cording to EN15503 dB(A)Equipped with approved accessory (original) 99 98Vibration levels2Equivalent vibration levels (ahv,eq) at handles, measured according to EN ISO 22867,, m/s2Equipped with approved accessory (original), left/right 5.6/7.6 5.7/7.51 Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (stand-ard deviation) of 1 dB(A).2 Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s2.442 - 002 - 9