Redmond RMC-M10DE User Manual

Also see for RMC-M10DE: User manual

31Multicookers RMC-M10DE / RMC-M20DE / RMC-M30DEGBRRHP-M1 — ham maker for RMC-M20DE / RMC-M30DEDesigned for cooking ham, rolls and other delicacies of meat, poultry orfish with the addition of various spices. It may be used with multicook-ers from other manufacturers, in the oven or in a pan aerogrill withappropriate volume.RB-A300 — non-stick coated bowl for RMC-M10DECapacity: 3 L. The bowl features excellent non-stick and thermal conductiv-ity properties. It is suitable for product storage and oven use (below 260°C).Ceramic coated bowles by ANATO® (Korea): RB-C302 (3 L, for RMC-M10DE),RB-C502 (5 L, for RMC-M20DE), RB-C602 (6 L, for RMC-M30DE)The ceramic bowl has excellent non-stick and thermal conductivity proper-ties. It was especially designed for baking, frying and cooking hot cereals.Suitable for product storage and oven use.RB-A503 — non-stick coated bowl by DAIKIN ® (Japan), for RMC-M20DECapacity: 5 L. Non-stick coating of the bowl is scratch-resistant and fea-tures excellent thermal conductivity properties. It was especially designedfor frying, baking, and cooking hot cereals. The bowl is suitable for productstorage and oven use.RB-S500 — steel bowl for RMC-M20DECapacity: 5 L. The bowl features excellent non-stick and thermal con-ductivity properties. Recommended for making various soups and jams.Suitable for blender and mixer use to prepare fruit and vegetable pureesand cream soups.RB-A600 — non-stick coated bowl for RMC-M30DECapacity: 6 L. The bowl features excellent non-stick and thermal conductivityproperties. It is suitable for product storage and oven use (below 260°C).V. CLEANING AND GENERAL MAINTENANCEGUIDELINESBefore you start cleaning the device, make sure that it is unplugged andhas cooled down. Use soft cloth and mild soap to clean. We recommendcleaning the appliance after each use. Prior to first use or in order toremove the odor, boil half a lemon for 15 minutes using “DAMPFGAREN/KOCHEN” program.Do not use a sponge with a hard or abrasive surface; solvent and abra-sive cleaning methods (gasoline, acetone) are not allowed. Do not im-merse the device in water or wash it under running water.Clean the housing as needed, following cleaning and general mainte-nance guidelines provided. We recommend cleaning inner aluminum lidafter each use.It is recommended to clean the bowl after each use.The bowl is dishwasher safe. By the end of cleaning,wipe the bowl dry.The steam valve needs to be cleaned after each use.The steam valve can be taken off from the inner orouter side of the lid (depending on the model).Gently, without effort pull the steam valve towardsyourself in order to remove it from the outer side ofthe lid (Fig. A). Disassemble and rinse under runningwater. Let the valve dry, carry out the assembly in returnsequence and install back into place.Gently turn the steam valve counterclockwise in orderto remove it from the inner side of the lid (Fig. B). Rinsethe valve under running water, let it dry and installback into place, by turning clockwise.Clean the condensation collector, located on the hous-ing of the device after each use. Gently press the lower part of the col-lector or hold it by its sides (depending on the model) and gently pull ittowards yourself to remove. Pour the condensate out, wash the collectorand install it back into place.Condensation may sometimes accumulate in the special cavity aroundthe bowl. Remove it with cloth or tissue.AB