Redpine Signals RS9110-N-11-02 User Manual
Also see for RS9110-N-11-02: Integration guide
             | |
Contents
| 
Redpine Signals, Inc. Proprietary and confidential Page 8RS9110-N-11-02 Evaluation BoardUser GuideVersion 1.52: Wi-Fi Data Transfer TestsThe evaluation kit allows you to carry out WLAN data transfer tests, where inRS9110-N-11-02 EVB can be connected to any 802.11bgn Access Points anduser can run any network applications to verify the WLAN connection. You canalso evaluate the application level throughputs using this EVB.In order to perform these tests, a Windows XP, or Linux, or Window CE basedWLAN driver is provided along with the evaluation kit.2.1: Test SetupIf you want to evaluate the system, you need to have following test setup.The EVB is inserted into the Laptop that has SDIO slot, and it is wirelesslyconnected to an 802.11n Access Point. Data transfer tests can be performedusing any other systems in the LAN, which is connected to AP. The test setupis shown in the figure below. The sub-net mask of the wireless interface onthe Laptop and AP should be same as that of the LAN, for which AP isconnected via Ethernet.Please note that, in order to evaluate the Lite-Fi™ on a Windows CE or aWindows Mobile platform, you need to replace the Laptop in the followingsetup, with any of the Windows CE or Windows Mobile based SDIO platform.Laptopwith SDIO slot802.11nAccess PointRS9110-N-11-02EVBSDIOEthernetLANFigure 4: Test Setup for Throughput MeasurementThe following is the list of the test setup requirements:• Laptop with SDIO slot and Windows XP or Linux operating system, or aWindows CE or Windows Mobile based SDIO platform.• RS9110-N-11-02 EVB• 802.11n Access Point |
Related manuals for Redpine Signals RS9110-N-11-02
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine