Reer ADMIRAL AX BK Installation, Use And Maintenance Manual

Reer ADMIRAL AX BK Installation, Use And Maintenance Manual Manual pdf 9 page image

8 8540581 - 29/09/2010 - Rev.10VERTICAL POSITION OF THE BARRIER14 mm, 20 mm resolution models. These models are suitable for the protection offingers.40mm resolution models. These models are suitable for the protection ofhands.The minimum safety distance S is calculatedaccording to the following formula:S = 2000(t 1 + t2) + 8(D-14)(D=resolution)This formula is valid for distances S between 100and 500 mm. If this formula results in S beinggreater than 500 mm, the distance can be reducedto a minimum of 500 mm by means of the followingformula:S = 1600(t 1 + t2) + 8(D-14)If, due to the specific configuration of the machine,the dangerous area can be accessed from above,the highest beam of the barrier must be at a heightH of at least 1800 mm from the base G of themachine.Figure 690 mm resolution models. These models are suitable for the protection ofarms or legs and must not be used to protectfingers or hands.The minimum safety distance S is calculatedaccording to the following formula:S = 1600(t 1 + t2) + 850Î The height H of the highest beam from thebase G must never be less than 900 mm,while the height of the lowest beam Pmust never be more than 300 mm.Figure 7safety barrier point ofdangerdirectionofapproachreference planesafety barrierpoint ofdangerdirectionofapproachreference plane