Reer Admiral AX Series Installation, Use And Maintenance Manual
                                      | |
Contents
| 
22 8540569 • 4th February 2011 • Rev.12MECHANICAL ASSEMBLY AND OPTICAL ALIGNMENTThe Emitter and the Receiver must be assembled opposite each other (at a distancespecified in the technical data sheet). Use the fastening brackets and inserts supplied withthe system to place the Emitter and the Receiver so that these are aligned and parallel toeach other and with the connectors facing the same way.Depending on the dimensions and the shape of the support on which they are to be installed,the Emitter and Receiver must be assembled with the fastening inserts at the back, or elseby fitting these in the side groove (Figure 21).Perfect alignment of the Emitter and Receiver is essential in order to assure correct barrieroperation. The indicator LEDs on the Emitter and Receiver facilitate this operation.Î To perform an easier alignment the use of SFB circular brackets is necessary.These are available on request (ordering code 1330974).Figure 21• Position the optical axis of the first and last beam of the Emitter on the sameaxis as that of the corresponding beams on the Receiver.• Move the Emitter in order to find the area within which the green LED on theReceiver stays on, then position the first beam of the Emitter (the one close tothe indicator LEDs) in the centre of this area.• Using this beam as a pivot, effect small sideways movements of the oppositeend to move to the protected area clear condition. The green LED on theReceiver will indicate this condition.• Lock the Emitter and Receiver in place.During these operations it may be useful to check the presence of the weak signal "d"letter on the Receiver display. Upon completion of alignment, this LED must be off.Î If the Emitter and the Receiver are assembled in areas that are subject to strongvibrations, the use of vibration-damping supports is necessary, in order toprevent circuit malfunctions (code SAV-3 1200088, code SAV-4 1200089). |
Related manuals for Reer ADMIRAL AX
Reer ADMIRAL AX BK Installation, Use And Maintenance Manual
Reer Magnus RFID S Series Installation, Use And Maintenance Manual
Reer JANUS Installation, Use And Maintenance Manual
Reer EOS4 Installation, Use And Maintenance Manual
Reer EOS2 Installation, Use And Maintenance Manual
Reer SAFEGATE S Installation, Use And Maintenance Manual
Reer VISION MXL Installation, Use And Maintenance Manual
Reer ADMIRAL Directions For Installation, Use And Maintenance
Reer JANUS 2B TRX Directions For Installation, Use And Maintenance
Reer JANUS Quick Installation Manual
This manual is suitable for:
ADMIRAL AXAdmiral AX 1051Admiral AX 1052Admiral AX 1053Admiral AX 1054Admiral AX 1055Admiral AX 1059Admiral AX 1201Admiral AX 1202Admiral AX 1203Admiral AX 1204Admiral AX 1205Admiral AX 1209Admiral AX 1351Admiral AX 1353Admiral AX 1354Admiral AX 1355Admiral AX 1359Admiral AX 1501Admiral AX 1502Admiral AX 1503Admiral AX 1504Admiral AX 1505Admiral AX 1509Admiral AX 151Admiral AX 152Admiral AX 153Admiral AX 1651Admiral AX 1652Admiral AX 1653Admiral AX 1654Admiral AX 1655Admiral AX 1659Admiral AX 1801Admiral AX 1802Admiral AX 1803Admiral AX 1804Admiral AX 1805Admiral AX 1809Admiral AX 2BAdmiral AX 301Admiral AX 302Admiral AX 303Admiral AX 304Admiral AX 305Admiral AX 309Admiral AX 3BAdmiral AX 451Admiral AX 452Admiral AX 453Admiral AX 454Admiral AX 455Admiral AX 459Admiral AX 4BAdmiral AX 601Admiral AX 602Admiral AX 603Admiral AX 604Admiral AX 605Admiral AX 609Admiral AX 751Admiral AX 752Admiral AX 753Admiral AX 754Admiral AX 755Admiral AX 759Admiral AX 901Admiral AX 902Admiral AX 903Admiral AX 904Admiral AX 905Admiral AX 909Admiral AX Series
manualsdatabase
Your AI-powered manual search engine