Reer EOS2 A Manual

Also see for EOS2 A: Quick start guide

Reer EOS2 A Manual Manual pdf 23 page image

EOS2 SAFETY LIGHT CURTAINOPERATION AND TECHNICAL DATALight signalsThe leds on the Emitter and Receiver light up according to system operating conditions.Refer to the tables below to identify the various indications (ref. Figure 23).EMITTER RECEIVER21Figure 23 - Light signalsEmitter light signalsTHREE-COLOUR LEDMEANING (Red/Green/Orange)System power-on. Initial TEST. REDFAIL condition (Table 18) 2RED BLINKINGTEST condition ORANGENormal operating condition 3GREENTable 13 – TX light signalsReceiver light signalsLEDMEANING TWO-COLOUR (Red/Green) (2) YELLOW (1)System power-on. Initial TEST. RED ONBREAK condition (A) RED OFFGUARD condition (C) GREEN OFFFAIL condition (Table 18) OFFRED BLINKING 3Table 14 – RX light signals EOS2 / EOS2 SlaveLEDMEANING TWO-COLOUR (Red/Green) (2) YELLOW (1)System power-on. Initial TEST RED ONBREAK condition (A) RED OFFCLEAR condition (B) OFF ONGUARD condition (C) GREEN OFFFAIL condition (Table 18) OFFRED BLINKING 3Table 15 – RX light signals EOS2 (With integrated control functions)English2The type of fault is identified by the number of flashes (see Troubleshooting chapter)3Double blinking (at power-on) of the GREEN led indicates that high range has been selected.22 8540738 • 2nd December 2009 • Rev.2