Regency G51 Owners & Installation Manual

Contents

Regency G51 Owners & Installation Manual Manual pdf 5 page image

5G51 Zero Clearance KitINSTALLATIONADECFBLOCATING YOUR G51 FIREPLACEDue to high temperatures the Insert should be located out of traffic andaway from furniture and draperies. Provide a minimum of 48" (1220mm)front clearance to the unit.This appliance is Listed for Alcove installations, maintain minimumAlcove clearances as follows, minimum ceiling height of 65.5"(1666mm),minimum width of 56.5" (1435 mm) and a maximum depth of 36"(915 mm).This unit is not approved for installation into a mobile home.FRAMING1) The trim kit allows for 1/2" (13 mm) of finish non-combustible facing material. The kit may be installed directly onand/or against standard combustible building materials.2) Frame in the Zero Clearance box for the Kit with framing material.3) For exterior walls, vapour barrier and insulate the Zero Clearance box to the same degree as the rest of the house,or according to local installation codes.4) The appliance may be enclosed above the standoffs on the cabinet but the clearances stated on the b-vent chimneymust be maintained.a) Cross Corner d) Islandb) Room Divider e) Flush with Wallc) Flat on wall f) Flat on WallCornerFraming DimensionsA B C839mm 1118mm 428mmWarning: Combustible materials must not extend insidethe stand-offs on the side, top and rear supports. Forsafety reasons do not modify or alter any components ofthe 390-900 kit.