Regency HZ54E Quick Start Manual

Also see for Horizon HZ54E: Owners & installation manual Owners & installation manual Owners & installation manual

• Firestops are required at each floor level and whenever passing through a wall.• Maintain clearances to combustibles as listed in the “Clearances” section.• Refer to the “Vent Restrictor Position” section for details on how to change the vent restrictor from the factory setting of Set 1 to Set 2 or Set 4if required.Note: Must use optional flue adaptor when using Rigid Pipe (Part # 770-994)Maximum: 40 ft. (12.2m)Minimum8’6” (2.6m)Min. 44”(1118mm)Max. 10’ (3m)(centerline to centerline)Minimum length of pipebetween elbows 12” (305mm)Maximum: 27 ft. (8.2m)02464081012141618202224262830Vertical Height (Feet)323436386 8Horizontal (Feet)2 0 4 10 12 16 1814 20Vent Restrictor on Set 2Vent Restrictor on Set 4Vent Restrictor on Set 1(factory setting)Please note min. 1 footbetween 90 o elbows isrequired.VENTING ARRANGEMENTSALLOWABLE VERTICAL TERMINATIONS FOR HZ54E-NG10The shaded area in the diagram shows all allowable combinations of straight vertical and offset to vertical terminations, using two 90o elbows, withRigid Pipe Venting Systems for Natural Gas. Two 45o elbows equal to one 90o elbow. Maximum of four 45o elbows allowed.Vent must be supported at offsets.HZ54E-11 Gas Fireplace | 7

/ 9

Related manuals for Regency Horizon HZ54E