Regency P36D-NG1 Owners & Installation Manual

Also see for P36D-1: Owners & installation manual

Contents

Regency P36D-NG1 Owners & Installation Manual Manual pdf 50 page image

50 Regency ® P36D-1 Zero Clearance Direct Vent Gas Fireplace50OPERATING INSTRUCTIONSMAINTENANCEINSTRUCTIONS1) Always turn off the gas valve before cleaning.For relighting, refer to lighting instructions.Keep the burner and control compartmentclean by brushing and vacuuming at leastonce a year. When cleaning the logs, use asoft clean paint brush as the logs are fragileand easily damaged.2) Clean appliance and door with a dampcloth (never when unit is hot). Never usean abrasive cleaner. The glass should becleaned with a gas fireplace glass cleaner.The glass should be cleaned when itstarts looking cloudy.3) The heater is finished in a heat resistantpaint and should only be refinished withheat resistant paint. FPI uses StoveBrightPaint - Metallic Black #6309.4) Make a periodic check of burner for properposition and condition. Visually check theflame of the burner periodically, making surethe flames are steady; not lifting or floating.If there is a problem, call a qualified serviceperson.COPY OF THE LIGHTING PLATE INSTRUCTIONSBurner Tray:The burner tray is positioned directly under theburner tube(s) and logs and is made of a differentgauge material from the rest of the firebox andbody. Therefore, the varying thicknesses of steelwill expand and contract at slightly differentrates which can cause "ticking" and "cracking"sounds. You should also be aware that as thereare temperature changes within the unit thesesounds will likely re-occur. Again, this is normalfor steel fireboxes.Blower Thermodisc:When this thermally activated switch turns ONit will create a small "clicking" sound. This is theswitch contacts closing and is normal.Pilot Flame:While the pilot flame is on it can make a veryslight "whisper" sound.Gas Control Valve:As the gas control valve turns ON and OFF, adull clicking sound may be audible, this is normaloperation of a gas regulator or valve.Unit Body/Firebox:Different types and thicknesses of steel willexpand and contract at different rates resultingin some "cracking" and "ticking" sounds will beheard throughout the cycling process.Blower:FPI gas appliances use high tech blowers topush heated air farther into the room. It is notunusual for the fan to make a "whirring" soundwhen ON. This sound will increase or decreasein volume depending on the speed setting ofyour fan speed control.OFFa