Regency PTO28CIT - NG Owners & Installation Manual

Regency PTO28CIT - NG Owners & Installation Manual Manual pdf 12 page image

12 Regency PTO28 City Table Outdoor Gas FireplaceINSTALLATIONLP HARD LINE CONVERSION(FOR USE IN PLACE OF LP TANK)Each Kit contains one LP Hard Line Conversion KitConversion Kit # 286-972 Contains:Qty. Part # Description1 909-265 Max 0.5 psi label1 286-035 Regulator mounting base1 286-036 Regulator mounting top1 910-054 Regulator LP1 904-978 3/8” flex pipe 18” length4 904-553 #8 Philips1 919-229 Instruction sheet2. Remove LP tank and LP hose from valve.4. Secure regulator in position with top bracket - secure with 2 screws.NOTE: Top bracket to sit over top of lower bracket.Attach supplied "MAX. 0.5 PSI" sticker to top bracket.1. Remove panel (90º to the right of the ON/OFF switch). Lift panel up slightlyby handle and pull outwards. Place panel on a soft, clean surface.Remove thispanelLP hoseSwitchHandleRegulatorRegulatorBracketTopBracket3. Install regulator bracket onto unit base with 2 screws. Connect fl ex line toregulator—position regulator onto bracket.Diagram 1Diagram 2Location to installregulator Access forHard lineDiagram 3Diagram 4Diagram 5Turn off unit and allow to cool to room temperature.THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTERIF IN DOUBT DO NOT DO THIS CONVERSION !!