44 | Regency Ultimate™ U900E Gas FireplaceinstallationSCREEN & INNER DOOR FRAME INSTALLATION919-691 08.03.161SAFETY SCREEN / INNER DOOR FRAME REMOVAL/INSTALLATIONTHE INNER DOOR FRAME (3) MUST BE PURCHASED SEPARATELY IN EITHER STAINLESS STEEL OR BLACK1. The inner door trim (1) and safety screen (2) come attached to the fireplace.Remove the inner door trim and safety screen by pulling the bottom of thetrim towards you as one, then lift up.3. Install screen into inner door frame - secure safety screen by bending in 6tabs in locations shown below.4. Hook the inner door frame (3) and safety screen assembly (2) overthe inner door trim.15. Bend the center tab up and secure with a screw to attach the innerdoor frame/safety screen assembly to the inner door trim7. Attach completed assembly to the glass door on unit.8. Secure the assembly with 1 screw on each side.Note: Bottom of frame is secured to glass door frame with left and rightmagnets.23Tabs2. Remove screws from inner side of the inner door trim and discard screwsand the brackets. (Brackets not shown). Remove the screen mesh frominner door trim.Screw Locations6. Bend in magnetic tabs—located in lower corners of the frame (lowerleft shown below).
