Regin TG-R5W Instruction
Also see for TG-R5W: Instruction
   |
INSTRUCTIONi Read this instruction before installationof the productTG-R5W12341+ -+ -2Pairing the sensor with the receiverLook in the receiver instruction for information on how to pair the sensorwith the receiver.Pairing/connection testThe connection to the receiver must be tested before mounting the sen-sor.1. Place the receiver and the sensor at the desired locations.2. For RCW-M: Put the receiver into Programming modeFor RCW-M32: Push the Test button to activate the display.3. Perform a Walk test: Press the Test button on the sensor to see if thelocation is within signal range of the receiver. The LED light will indi-cate if the sensor is paired with the receiver or not. There will also bea long beep from the receiver when the sensor is paired successfully.LED light3 flashes (When Test button is pressed):The sensor is not paired with the receiver.Flashing (When Test button is pressed):The sensor is paired with the receiver.Flash every 4 seconds:Batteries need to be replaced.Mounting the sensorThe sensor should be mounted in an open space with good air circulation,and at a height of 1.2 to 1.4 meters.1. Use the screw holes to mount the sensor on the wall2. Snap on the coverTG-R5WWireless room temperature sensorTG-R5W is a wireless room temperature sensor that monitors tem-perature and sends a signal to a Regin Modbus receiver.CommissioningFor optimal temperature monitoring, the sensor should be mounted inan open space with good air circulation, and at a height of 1.2 to 1.4meters.The sensor must be paired with the receiver before it can be used.Installation of batteries1. Open the cover by pressing the locking tab carefully with ascrewdriver2. Insert two 1.5 V L91 Lithium batteriesOther functionsTemperature detectionThe sensor monitors the temperature at a preset time interval (factorysetting is 2 minutes), and if the temperature has changed by morethan ± 0.2°C it will send a signal to the receiver. If the temperature isstable, the sensor will transmit a signal every 95-115 minutes.Self testThe sensor will automatically send a supervisory signal to the receiverat an interval of 95 to 115 minutes to test the signal.The receiver will indicate “out of signal” if it has not received thesignal at a preset interval.Technical dataPower supply 1.5 V L91 Lithium x 2Battery lifetime 10 yearsFrequency 868 MHzOperating temperature -10...+50°COperation humidity Max. 85 % RH (non-condensing)Protection class IP30Dimensions (HxWxD) 86 x 86 x 30 mmThis product carries the CE mark. For more information, seewww.regincontrols.com.Product documentationAll documentation can be downloaded from www.regincontrols.comContactAB Regin, Box 116, 428 22 Kållered, SwedenTel: +46 31 720 02 00, Fax: +46 31 720 02 50www.regincontrols.com, info@regincontrols.com12811EMAR 19EN Number Description1 Batterycompartments2 Screw holes3 Connection/Test button4 LED light |
Related manuals for Regin TG-R5W
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine