RehabCare ErGo Selpro 1000 Operating Manual
                | |
Contents
| 
Operating Manual forErGo Selpro 1000-1500.Toilet, Bath and Hygiene Chair 05-2018TD 5.6-001 TS39000 - ENG ver1 Side 8 af 1612. Maintenance• Wheels must be free of hair, soap, and dirt.• Yearly service is recommended.• Moving parts should be checked, tightened and greased.13. ServiceThe chair should undergo a yearly service, carried out by qualified personnel. The yearly service iscompulsory according to standard EN ISO 17966. It is the owner’s responsibility to ensure the yearlyservice is undertaken. A service protocol should be established for the serviced chair, and be signedby the customer after every service.If the service technician discovers a serious fault during service, it is the technician’s duty to removethe chair if the fault constitutes a safety risk.Service, repairs and other additional work on the chair between services should be noted in theservice protocol.13.1 Service - WHEELSWheels should be regularly serviced as necessary, usually tightening.The wheels have closed bearings; therefore greasing is not necessary.Cleaning fluids containing corrosive or damaging materials must not be usedWheels and parts should be replaced as soon as they no longer run smoothly.14. Transport and storageIf the chair is not to be used for a long time, it is recommended that it be covered to protect it from dust anddirt. It is also recommended that the battery be removed as its lifespan is severely reduced if allowed tobecome completely discharged.The chair should be stored in a frost-free environment with normal air humidity (80%).Requirements for storage and transport:- Air humidity between 10 and 80%- Temperature between -30 and 40 degrees C- Pressure between 700-1100 hPa15. DisposalFor disposal, separate the chair into electronic and metal waste. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine