Sunfree Series- 6 -Chapter 2 Preparation2.1 Safety InstructionsDANGER· There is possibility of during to electrical shock and high voltage.· Do not touch the operating component of the inverter, it might result in burning or death.· To prevent risk of electric shock during installation and maintenance, please make surethat all AC and DC terminals are plugged out.· Do not touch the surface of the inverter while the housing is wet, it might lead to electricalshock.· Do not stay close to the inverter while there are severe weather conditions including storm,lighting, etc.· Before opening the housing, the SAJ inverter must be disconnected from the grid and PVgenerator; you must wait at least five minutes to let the energy storage capacitors fullydischarged after disconnecting from power source.WARNING·The installation, service, recycling and disposal of the inverters must be performed byqualified personnel only in compliance with national and local standards and regulations.·Any unauthorized actions including modification of product functionality of any form maycause lethal hazard to the operator, third parties, the units or their property. SAJ is notresponsible for the loss and these warranty claims.·The SAJ inverter must only be operated with PV generator. Do not connect any othersource of energy to the SAJ inverter.·Be sure that the PV generator and inverter are well grounded in order to protect propertiesand persons.CAUTION·The inverter will become hot during operation. Please do not touch the heat sink orperipheral surface during or shortly after operation.·Risk of damage due to improper modifications.·Risk of damage due to improper modifications.