ManualVideo 75 Plus Studio- 4 - Select 0 on the vertical drag adjustment ring. Open the lock of the camera sliding balance plate.On the Video 75 Plus Studio the lock of the camera slidingbalance plate is opened on the left side of the fluid head. By turning the spindle forwards and backwards movethe camera until you have reached a position wherethe camera is balanced horizontally. Rear-heavy came-ras are moved to the front by turning the spindle clock-wise, Front-heavy cameras are moved to the back byturning the spindle counter clockwise. This will beeasier when the camera is held in a horizontal position. Secure sliding balance plate with clamping lever(spindle drive is self-locking, clamping serves to elimi-nate play).On the Video 75 Plus Studio the lock of the balance plateis closed on the left side of the fluid head.Caution: If you can’t manage to centre the camera, youshould move the V-plate to a different positionon the tripod mounting adapter.3.6 Adjusting the camera’s counterbalance Hold the camera by securing the pan bar. Turn thecounterbalance knob to that number which best com-pensates for the weight of the camera. After each spring is released, check if the camera willremain in a tilted position, without moving upwards ordownwards significantly.