14SaeboStim MicroLead WiresThe Lead Wires are already installed and connected onyour device. See Figure 4. If they become disconnectedfor any reason, please follow the instructions below toreconnect.Reconnecting the Lead WiresLead Wires determine the polarity of the current and iscoded accordingly; Black is negative and Red is positive.If you accidentally disengage the Lead Wires from the unit,reconnecting is very simple. To reconnect the Lead Wiresnaps to the SaeboStim Micro unit, insert the snap studend into the inside position of the slot and slide toward theoutside position to lock in place.The Red Lead Wire is placed on the right hand side ofthe unit and the Black on the left side with the batterycompartment facing you. The Black Lead Wire will needto be pushed down and slid to the left to secure in place.See Figure 5. The Red Lead Wire will need to be pusheddown and slid to the right to secure in place. See Figure 6.Lead WiresFig 4Fig 5Fig 6