Saeco 10002778 Operation And Maintenance Manual

Saeco 10002778 Operation And Maintenance Manual Manual pdf 9 page image

75 67 8 91 324Insert the filter in the empty tank.The reference mark and thegroove must match. Push firmlyuntil it is completely inserted.Select “water filter” and pressagain.When the machine has finished, turn the knob until it is in the rest position ( ). Press a few times until the“exit” message is displayed. Then press . The machine is now ready for use.NOTE: if the Intenza water filter is not used, insert the small white filter previously removed (see step 1)into the tank.Press .Select “maintenance” and press thebutton.Select “activate filter” and press thebutton. Turn the knob to the position.Water dispensing begins..3 maintenance3.1 water filter 3.1.3 activate filterexecute nowINTENZA WATER FILTERTo improve the quality of the water you use, and to extend the life of your machine at the same time, it isrecommended that you install the water filter. After installation, select the water filter function under themaintenance menu (see page 20). By setting the water filter status to ON, the machine informs the user whenthe filter must be replaced.Remove the water filter from its packaging, immerse it vertically (with the opening facing upwards) incold water and gently press its sides so as to let the air bubbles out.Remove the small white filter fromthe tank and store it in a dry placesheltered from dust.Fill the tank with fresh drinkingwater and re-insert it into themachine.Set the Intenza Aroma System:A = Soft waterB = Medium water (standard)C = Hard waterPlace a container beneath the hotwater/steam wand.1.1.2.2.2.3.1.