Saeco 10003323 Operating Instructions Manual

Saeco 10003323 Operating Instructions Manual Manual pdf 30 page image

• 30 •• 30 •RedOrangeOrangeGreen• Turn the machine ON by pressing thepower switch to “I”. Priming the Water Circuit• To prime the water circuit, place acontainer under the steam/hot waterwand(Pannarello, if supplied).• The display shows the ON/OFF icon.• Make sure the ON/OFF button is set tothe “ ” position; if this is not the case,set it to that position.• Press the ON/OFF button to turn themachine on.• The display indicates that the circuitmust be primed.Note: Before starting themachine after long periodsof inactivity, the water circuit mustbe primed.BlackRed• Turn the selector dial clockwise to setit to the “ ” position. The machinestarts the automatic priming of thecircuit by letting out a preset quantityof water through the steam/hot waterwand (Pannarello, if supplied). The barunder the icon shows the operationprogress.At the end of the priming process,the display shows an icon (see fig-ure) indicating that the selection dialmust be brought back to the central“ ” position.• The display then shows the machinewarm-up icon, as shown in the fi gure.When warm-up is complete,the machine performs a rinsecycle of the internal circuits.In this phase, this icon will be dis-played:• When the operations described aboveare complete, this icon will be dis-played:The machine is then ready to brewbeverages.• To brew coffee, dispense hot water orsteam, and for a proper use of the ma-chine, carefully follow the instructionsprovided.If the machine is being usedfor the first time or after along period of inactivity, follow theoperations described in the follow-ing section.