1 Turn the classic milk frother to the left.2 Press the release buttons on both sides of the drip tray (1) andpull the drip tray out of the machine (2).3 Remove and empty the coffee grounds container.4 Empty and rinse the drip tray under the tap.5 Place the coffee grounds container back in the drip tray.6 Slide the drip tray back into the machine until it locks intoposition with a click.Note: Make sure that the machine is still switched on when youremove the drip tray. If you switch off the machine before youremove the drip tray, the 'empty coffee grounds container' icon willbe visible on the display when you switch on the machine again,even though the drip tray is empty.Cleaning the water tank1 Remove the water tank from the machine and rinse it with freshwater periodically.2 Fill the water tank with fresh water up to the MAX level indicationand place it back in the machine.Cleaning the bean hopperClean the bean hopper with a dry cloth once a month.Cleaning the brew group and the coffee exit ductWeekly cleaning of the brew group1 Turn off the machine and unplug it.2 Remove the drip tray with the coffee grounds container.3 Empty the drip tray and rinse it under running water.4 Empty the coffee grounds container and rinse it under lukewarmrunning water.5 Open the service door.6 Press the PUSH button (1) and pull at the grip of the brew groupto remove it from the machine (2).1212122 English