ENGLISH12Frothed milk lengthFollows the previous instructions in the “6.3.1 Brewing a milk-based product” chapter,“One frothed milk”, until the MILK FROTH function is selected.> Keep the OK button pressed a few seconds, and release the button when the machinedisplays the necessary sequence of operations: carafe insertion, milk frother dispensingspout extraction.Wait for the necessary pre-heating time.The machine is in the programming stage andis starting to dispense the frothed milk.> Press the OK button as soon as the desired quantity has been reached.Now the button is programmed: every time it is pressed, the machine will brew theproduct in the quantity just set. After the product has been brewed, the machineallows for a quick cleaning of the carafe ducts. Please refer to the “7.4.1 Quick milkcarafe ducts rinse cycle” chapter.6.4 Hot water dispensing spoutInserting phase> Tilt the water dispensing spout slightly and insert it completely on the machine tracks.> Press and rotate the water dispensing spout downwards to lock it to the machine.Removing phase> Press the two side buttons to unlock the dispensing spout and lift it slightly.> Pull the water dispensing spout to remove it.6.5 Hot water-based preparations6.5.1 Hot water dispensingCheck that the water dispensing spout is installed. Otherwise, follow the instructionsin the “6.4 Hot water dispensing spout” chapter, “Inserting phase”.Place a container under the hot water dispensing spout.Burning hazard! At the beginning of each product brewing, hot water or steam spraysmight be present. Wait until the end of the cycle before removing the water dispensingspout.> Press the MENU button.> Select the DRINKS function.> Select the HOT WATER function.The machine is waiting to start the water dispensingprocess.The water dispensing spout must be installed.> Press the OK button to confirm. Wait for the necessary pre-heating time.The machinestarts dispensing hot water.Dispense the desired hot water quantity.> To stop dispensing, press the OK button. After the product has been brewed, themachine goes back to the main menu.7. Cleaning and maintenanceRegular cleaning and maintenance of the machine are fundamental to prolong its lifecycle. Otherwise, the machine will stop working correctly. This chapter describes thedetails of the operations to be carried out and their schedule.Make sure to read the “3. Safety” chapter.All cleaning operations must be carried out when the machine has cooled.To clean the machine use a wet soft cloth: do not use alcohol, solvents and/orabrasive objects. Only the drip tray grill and those parts of the carafe indicated in the“7.4.3 Weekly cleaning of the milk carafe components” section can be washed in thedishwasher. All other components must be washed in lukewarm water.Damages or improper use caused by cleaning and maintenance activities are NOTcovered by the warranty.MEMOMEMODRINKSMENUHOTWATERIncanto_OTC_EN-IT-DE_Rev01.indb 12 27/03/15 12:10