Saeco Intelia Deluxe User Manual

Contents

Descaling procedureCALCCLEANNote: You can pause the descaling or rinsing cycle by pressing the ESCbutton. The display will show the following icon. To continue the descalingor rinsing cycle, press the OK button.1 Remove and empty the drip tray. Slide the drip tray back into themachine.Note: Remove the AquaClean water filter from the water tank (if present).2 Remove the automatic milk frother from the steam wand.3 Press the OK button.4 The display shows the following icon to indicate that the machine entersthe descaling cycle. If you want to exit the descaling cycle, press the ESCbutton.5 Pour the entire bottle of Saeco descaling solution (250ml) into the watertank.6 Add water to the descaling solution in the water tank up to the CALCCLEAN indication.7 Place a large container (1.5 l) under the steam wand and dispensingspout.8 Press the OK button to start the descaling cycle.Note: The machine dispenses the entire descaling solution at regularintervals through the steam wand and dispensing spout (this takesapproximately 25 minutes).9 Wait until all of the descaling solution has been dispensed. Remove andempty the container.10 Remove and empty the drip tray. Slide the drip tray back into themachine.11 Rinse the water tank and fill it with fresh water up to the CALC CLEANindication. Slide the water tank back into the machine.12 Place the container back under the steam wand and dispensing spout.13 Press the OK button to start the rinsing cycle (this takes approximately 4minutes).CALCCLEAN- The display shows the following icon to indicate that the rinsing cycle isfinished.14 The display shows a tick icon.15 Rinse the water tank and fill it with fresh water up to the MAX level. Slidethe water tank back into the machine.16 Press the OK button to end the descaling cycle.17 Place a container under the steam wand and dispensing spout.19English