Saeco Nina cappuccino Operating Instructions Manual

Also see for NINA: Operating instructions Manual Operating instructions Operating instructions

Contents

Saeco Nina cappuccino Operating Instructions Manual Manual pdf 17 page image

• 1 •English• When the desired quantity of coffee has been obtained,turn the selection knob (17) to the " " position in orderto stop coffee brewing. Wait a few second after brewinghas stopped, then remove the cups of coffee (Fig. 15).• (Fig.16) - remove the pressurized portafilter and emptythe remaining coffee residues.note: if a small quantity of water remains in theportafilter; this is absolutely normal and is dueto the portafilter features.note for cleaning: Keep the filter of thepressurized portafilter clean by removing it fromits seat and washing it with drinking water (Fig. 17). Washthe adapter and the pin of the portafilter, then wash theportafilter itself.5.2 using Coffee Pods• (Fig.10) - By using a coffee spoon, remove the groundcoffee filter (11) and the adapter (12) from the pressurizedportafilter (10).• (Fig.7) - Remove the pin (13) from the pressurizedportafilter (10).• (Fig.9B) - Insert the pod filter (14) into the pressurizedportafilter (10).• (Fig.11) - Insert the portafilter into the brew unit from thebottom (6).• (Fig.12) - turn the portafilter from left to right until it locksin place.• (Fig. 14) - Preheat the pressurized portafilter by switchingthe selection knob (17) to the " " position until somewater spills out of it. this is to be done only for the firstcoffee brewing.• when 50cc of water have flowed out, switch the selectionknob (17) to the " " position in order to stop hot waterdispensing.• (Fig.16) - remove the pressurized portafilter from themachine by turning it from right to left. Be careful not toremove the filter.• (Fig.9B) - Insert the pod into the portafilter and make surethe paper of the pod does not overhang the portafilter.• (Fig.11) - Insert the portafilter into the brew unit from thebottom (6).• (Fig.12) - turn the portafilter from left to right until it locksin place.• Take 1 preheated cup and place it under the portafilter;make sure that it is correctly placed under the coffeedispensing holes.• (Fig.14) - Turn the selection knob (17) to the " "position.• When the desired quantity of coffee has been obtained,turn the selection knob (17) to the " " position in orderto stop coffee brewing, then remove the coffee cup.• (Fig.16) - Wait a few seconds after brewing, then removethe portafilter and dispose of the used pod.note for cleaning: Keep the filter of thepressurized portafilter clean by removing it fromits seat and washing it with drinking water (Fig. 17). thenwash the portafilter.6 tiPs FoR CHoosinG CoFFeeAs a general rule any type of coffee available on themarket can be used. however, coffee is a natural productand its flavour changes according to its origin and blend;it is therefore a good idea to try different types of coffeein order to find the most suited to your personal taste.For optimal results, however, we recommend usingespresso machine blends. As a rule, Coffee shouldalways come out of the portafilter without any dripping.the speed of coffee dispensing can be modified byslightly changing the amount of coffee in the filter and/orby using a different coffee grind.Saeco recommends using single-dose coffee podsmarked ESE for a tasty coffee and easier cleaning andpreparing.BeFoRe usinG tHe Hot WAteR/steAMJet, MAKe suRe tHAt tHe steAM sPout(PAnnARello) is PositioneD oVeR tHe DRiPtRAy.7 Hot WAteRDanger of scalding! When brewing starts, spurtsof hot water may come out. the spout can reachhigh temperatures: do not touch it with bare hands.• (Fig.3) - Press the ON/OFF button (2).• Wait until the "machine ready" light (15) turns on. Themachine is now ready.• (Fig.18) - Place a container or a teacup under the steamspout (Pannarello).• (Fig.5) - Open the knob (4).• (Fig.6) - Switch the selection knob to the " " position(17).• When the desired quantity of hot water has beendispensed, set the selection knob (17) to the " "position.• (Fig.5) - Close the knob (4).• Remove the container with hot water.8 steAM / CAPPuCCinoDanger of scalding! When brewing starts, spurtsof hot water may come out. the spout can reachhigh temperatures: do not touch it with bare hands.• (Fig.3) - Press the ON/OFF button (2).• Wait until the "machine ready" (15) light turns on.• (Fig.19) - Switch the selection knob (17) to the " "position.• Wait until the light (16) turns on. The machine is now ready