Saeco Odea Go Operating And Maintenance Manual

Also see for Odea Go: Operation and maintenance manual Operation and maintenance manual Service manual

172 34 6751Press the “PUSH” button toremove the group.Make sure the group is in restposition; the two references mustmatch.Wash the Brew Group withrunning water. Wash fi lterscarefully.CLEANING THE BREW GROUPThe Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove thedregs drawer as shown in fig. 4 on page 16. Once you have washed and inserted the Brew Group, insertthe dregs drawer and close the service door.Make sure the components are inthe correct position.The hook shown must be in thecorrect position; to check itsposition, firmly press the “PUSH”button.Insert the washed and dried BrewGroup.DO NOT PRESS THE “PUSH”BUTTON.Insert the dregs drawer and closethe service door.The lever on the rear part of thegroup must be in contact withthe Brew Group base.