Saeco Office One SUP028R Operating Instructions Manual

Also see for Office One SUP028R: Operating instructions

Contents

• 38 •Installation of the machine - Service Provider Manual1. Program. menu Press ENTER to access Programming menu modePassword Insert password Default value:Default: 0000Programming menu mode access password (4 digits)1.1. Identification 1.1.1.Admin/Filial PINDefault 00000It identifies the Administrator and Subsidiary Code: Numerical value from 0 to65535.With the Tag Reader appliance model this code will be matched with the codestored in the Tags.1.1.2. Model (Read only) It identifies the appliance model.1.1.3. Version (Read only) It identifies the appliance software version.1.1.4. Point of sale:Default 00000It identifies the sale point: Numerical value from 0 to 655351.2. Setup 1.2.1. Std temperatureDefault: 100°CBoiler working temperature (expressed in centigrade degrees) when the applianceis “ready” to work. range: 90-105.1.2.2. Prog. doses 1.2.2.1. Short prod. doseDefault: 130Product short quantity (it’s a numerical parameter without physical equivalent, e.g.cc)1.2.2.2. Medium prod. doseDefault: 180Product medium quantity (this is a numerical parameter without any physical equiv-alent, e.g. cc).1.2.2.3. Long prod. doseDefault: 400Product long quantity (it’s a numerical parameter without physical equivalent, e.g.cc)1.2.3. Pre-brewingDefault: MediumPre-brewing time:No, Short, Medium, Long.1.2.4. RinsingDefault: No Yes enables rinsing process: The process starts when the boiler reaches the readytemperature after appliance power on.this process starts only if the boiler temperature is lower than 50°C at the poweron of the appliance1.2.5. Descaling 1.2.5.1. Water hardnessDefault: 1 Range 0-4.0 disables descaling check function. With hardness 1, 2, 3 and 4 the descalingcheck function is enabled and the alarm appears after about 120, 90, 60, 30 litresrespectively1.2.5.2. Descalc. warningDefault: Yes Yes enable descaling alarm signal on display1.2.6. Warning filterDefault: No Yes enable softener filter cleaning message on display. When activated the alarmappears after about ca. 60 lt., in any case after 60gg.1.2.7. Credits 1.2.7.1 Credit check (Read Only)Yes: Appliance working by checking the remaining creditsNo: No credits check is enabled1.2.7.2 Credits warningDefault: Yes “Yes” enables:- display of the credit alarm on reaching the minimum preset credit quantity;- display of the “no credit” alarm, when credits have been used up.1.2.7.3 Loads creditsDefault: 000Number of credits to insert:Range 0 - 2561.2.8. Payment syst 1.2.8.1 Enable systemDefault: No Yes enables payment system use.This function can be enabled only if the appliance is provided with a PCB for step-per coin slot management.1.2.8.2 Display creditDefault: No Yes enables credit display of the stepper coin slot.This function can be enabled only if the appliance is provided with a PCB for step-per coin slot management.1.2.9.LanguageDefault: EnglishSelect the language to use.1.2.10. Coffee filterDefault: No Yes enables filter coffee function.Only “esc” button will dispense filter coffee.1.2.11. Dreg delayDefault: 15Exhausted capsules reset waiting time expressed in seconds (with dreg drawerremoved) when relative warning or alarm is present. After this time the warning orthe alarm is resetRange: 0-255 seconds.11.3 Description of the programming menu